The Higher Standard

Serving Odessa-Midland and the Permian Basin Since 1947

Each year as summer turns into autumn, The Darville Company offers the Fall Clean & Test. The changing seasons are a perfect time to get your system checked out – when you’re switching over from heating to air conditioning or vice versa. Now, we’re taking the Fall Clean & Test to a whole new level with the Peak Performance Agreement. In this post, we’ll explain the Clean & Test as well as what’s included for Peak Performance!

CLEAN AND TEST

The Fall Clean & Test focuses on your gas or electric heating system. Many of these tasks should definitely be performed by a licensed professional. The Clean & Test includes the following services:

  • Check, clean and/or replace all filters (a complementary 1” pleated filter in standard sizes is provided)
  • Check and thoroughly clean the blower wheel, including the housing
  • Check all electrical connections
  • Check and clean the combustion air chamber
  • Check the heat exchanger
  • Clean the pilot assembly
  • Check the condensate drain on condensing furnaces, clear and clean if needed
    • A clogged drain pipe can cause significant water damage to your home if left unchecked.
  • Check and lubricate motors
  • Check all safety controls 
    • This is especially important as we switch from air conditioner to heat!
  • Check the power supply to the system
  • Check and calibrate the thermostat
  • Check the outdoor fan motor for heat pumps units
    • Fan maintenance is critical to avoid spending hundreds of dollars for a replacement.
  • Check the belts and adjust or replace if necessary
  • Clean and adjust burners
  • Check heat and fan relays and capacitors
  • Check temperature differential
    • This ensures your system is operating properly.
  • Provide maintenance supplies

PEAK PERFORMANCE

The Peak Performance agreement is another layer of security offered to our customers. This includes a premium service on all the points listed above. Some of the upgraded aspects include:

  • Fully level and calibrate thermostat
  • Completely remove wash blower if needed
  • Chemically clean condenser coil if needed
  • Check crankcase heater operation
  • Inspect and lubricate every moving part
  • Tape any leaking joins around the plenum coil
  • Fully test the cooling and/or heating systems
  • Test all motors, including starting and running capacitors
  • Test for gas leaks on furnace systems
  • Provide detailed inspection report

In addition, the Peak Performance agreement also includes services for after-hour emergencies at no extra charge, and offers contracts for routine maintenance schedules. You’ll also have one technician dedicated to your account, who you’ll get to know and trust.

THE HIGHER STANDARD

If you’re ready for Fall Clean & Test to make sure you’re ready for winter, or if you want to ensure Peak Performance for the long term, give us a call today! Make an appointment online, or call us at 432-580-9675. We provide The Higher Standard of Excellence in all that we do from how we answer the phone to the final white-glove clean-up.

TACLA4629E MP23756